How Can a Hash Board Tester Simplify ASIC Miner Repairs?

● 2026-11-11 ● - ● Leave me a message


ASIC miner repairs often involve checking hash boards, power supplies, and EEPROM data separately. A multifunctional tool can simplify this process by bringing several diagnostic functions together. The PicoBT Multifunctional Hash Board Tester integrates a hash board tester, EEPROM editor, and PSU tester, supporting more than 88 hash board models and over 20 mining power supply models. Xinjinyi explains how this integrated design helps technicians diagnose common mining machine faults and organize repair work more efficiently.

Contents

Why Are ASIC Miner Repairs Difficult?

When an ASIC mining machine stops working properly, the problem is not always caused by the same component. A machine may fail to start, show abnormal hash rate readings, lose communication with a hash board, or shut down unexpectedly. In these situations, replacing parts without proper testing can waste time and increase maintenance costs.

From a repair perspective, three areas deserve particular attention:

  • Hash board condition: A damaged or abnormal hash board can affect computing performance or prevent the miner from operating normally.
  • EEPROM data: Incorrect or problematic EEPROM data can create configuration or communication issues that require further inspection.
  • Power supply performance: An unstable or faulty mining PSU may prevent the machine from starting or supplying the power required by its components.

These components are closely related during operation. For example, when a miner fails to start, it is not practical to assume immediately that the hash board is defective. The power supply and relevant data should also be checked.

This is why we developed our PicoBT Multifunctional Hash Board Tester as a maintenance tool that combines several testing and editing functions in one device.

picobt-multifunctional-hash-board-tester

How Does PicoBT Simplify Hash Board Testing?

The PicoBT integrates three main functions: an EEPROM editor, a hash board tester, and a mining power supply tester. Instead of relying on separate tools for every basic maintenance task, technicians can use one multifunctional device to support several diagnostic steps.

1. Hash Board Testing Across Multiple Models

Hash boards from different ASIC miner manufacturers and product generations may have different structures and testing requirements. A repair tool that supports only a limited number of models can restrict the types of machines a workshop is able to service.

PicoBT supports more than 88 hash board models, covering equipment from Antminer, Innosilicon, WhatsMiner, Aixin, Cheetah, Aladdin, and Dragon. This broad model coverage makes it suitable for repair environments that handle different brands rather than focusing on a single mining machine series.

2. EEPROM Editing for Maintenance Work

EEPROM is used to store device-related data. During ASIC miner maintenance, technicians may need to inspect or edit EEPROM information on supported hash boards. PicoBT provides an EEPROM flash and editor function for Antminer and WhatsMiner hash boards.

This function is useful when the repair process involves EEPROM-related checks or data maintenance. However, EEPROM editing should not be treated as a universal solution for every hash board fault. Technicians still need to identify the actual cause of the problem before changing stored data.

3. Multiple Maintenance Functions in One Tool

The main advantage of an integrated tester is that it brings several maintenance functions into one working setup. A technician investigating a mining machine fault can use the relevant supported functions to check the hash board, review EEPROM-related issues, and test the PSU.

This does not mean every fault can be identified or repaired automatically. It means that the technician has a more consolidated set of tools for the diagnostic process, reducing the need to switch between separate devices for these specific tasks.

How Does EEPROM Editing Support ASIC Miner Maintenance?

EEPROM-related problems can be part of a wider ASIC miner maintenance issue. When a supported hash board has abnormal data or requires EEPROM maintenance, technicians need an appropriate tool to work with the stored information.

The PicoBT EEPROM flash and editor function supports Antminer and WhatsMiner hash boards. It adds a data-related maintenance function alongside the hardware testing capabilities of the device.

In practical repair work, we recommend following a careful sequence:

  1. Confirm the mining machine model and the corresponding hash board version.
  2. Identify the reported fault and check the relevant hardware condition first.
  3. Determine whether EEPROM inspection or editing is relevant to the problem.
  4. Use the supported EEPROM function according to the board-specific maintenance procedure.
  5. Recheck the machine after maintenance to confirm whether the original fault has been resolved.

Correct model identification is particularly important. EEPROM operations should follow the appropriate technical procedure rather than using data from an unrelated board version.

Why Is Power Supply Testing Important?

A mining power supply is responsible for delivering the electrical power required by the miner. If the PSU is faulty or operating abnormally, the machine may fail to start, shut down unexpectedly, or show symptoms that could be mistaken for hash board problems.

For this reason, testing the power supply is an important part of ASIC miner troubleshooting. PicoBT supports testing of more than 20 mining PSU models from several manufacturers.

Supported Power Supply Models

Brand Supported PSU Models
Innosilicon G1138, G1240, G1266, G1286, G1306, QB2412-B, QB2412-C
WhatsMiner P21, P20, P21e, P21d, P221, P222C
Antminer APW8, APW9, APW9+, APW12
Aixin / Cheetah TT240015P, HQ2500-A02

When a mining machine shows startup problems, checking a compatible PSU can help technicians narrow down whether the issue is related to the power supply or another part of the machine. This is especially useful for repair shops handling different miner brands and power supply generations.

Before testing, technicians should confirm the exact PSU model and follow the applicable connection and operating instructions. Mining power supplies involve high electrical power, so testing should be carried out by personnel familiar with the relevant electrical safety procedures.

Which ASIC Miner Models Does PicoBT Support?

Compatibility is one of the key considerations when selecting an ASIC hash board tester. A repair shop may receive older Antminer machines, newer models, or equipment from several manufacturers. Supporting a broad range of models helps reduce the need to maintain multiple model-specific testing devices.

PicoBT supports more than 88 hash board models, including the following product families.

Antminer Hash Board Models

Supported models include S21XP, S21 Imm, S21, T21, S19K Pro, S19 Pro, S19j, S19J Pro, S19A, S19A Pro, S19XP, S19+, S19i, S19 Pro+ Hydro, S19J Pro+, T19, S19, KA3, L7, D7, K7, T17, T17+, T17e, T17 Pro, S17, S17+, S17e, S17 Pro, S15, T15, S11, S9, S9i, S9j, S9k, S9se, T9+, L3+, and S7.

Innosilicon Hash Board Models

Supported models include T1, T2, T3, T3+, S3, S3+, T3H, A4, A4+, A6, A6+, T2T, T2T+, T2Ti, T2Ts, T2Tz, T2Tzs, T2Tzu, T2Tza, T2Th, T2Ths, T2Thm, T2Thf, T2Th+, T2Ths+, T2Thm+, T2Thf+, T2Thl+, L1, L2, L2HU, L2HF, L2HL, L2HS, and T1H.

WhatsMiner Hash Board Models

Supported models include M3V1, M3V2, M20, M20s, M21, M21s, M30s, M30s+, M30s++, M31s, M31s+, M32, M32s, M50, M50s, M60, M60S, M63S+, M63, M53S++, and M53.

Other Supported Brands

The listed additional models include Aixin A1, Cheetah Q3, Aladdin F1, and Dragon S5 and T1.

Because compatibility can depend on the exact board version and hardware configuration, we recommend confirming the specific model before purchasing or arranging a repair procedure.

Compatibility Overview

Testing Category Supported Range Main Function
Hash Board Testing More than 88 models Supports hash board diagnosis across multiple miner brands
PSU Testing More than 20 models Supports testing of compatible mining power supplies
EEPROM Flash and Editor Antminer and WhatsMiner hash boards Supports EEPROM-related maintenance operations

How to Use a Multifunctional Tester in a Repair Workflow

A useful repair process starts with identifying the symptom rather than immediately replacing a component. The following workflow shows how a multifunctional ASIC miner tester can fit into routine maintenance work.

  1. Identify the miner: Record the manufacturer, model, and relevant hash board or PSU version.
  2. Describe the fault: Note whether the machine fails to start, has abnormal hash rate readings, loses board communication, or shows another symptom.
  3. Check the power supply: If the PSU model is supported, use the appropriate PicoBT testing function to investigate possible power-related problems.
  4. Test the hash board: Select the compatible testing procedure for the identified board model.
  5. Review EEPROM requirements: If the symptoms indicate a possible EEPROM-related issue, use the supported editor function according to the relevant repair procedure.
  6. Verify the result: Recheck the relevant components and confirm whether the machine operates normally after maintenance.

This workflow helps organize the diagnostic process, but the exact sequence depends on the miner model and fault symptoms. Electrical inspection, component-level repair, firmware procedures, and other specialist work may still be required.

What Should You Consider When Choosing a Hash Board Tester?

Not every ASIC repair tool is suitable for every maintenance workshop. Before selecting a hash board tester, we recommend checking several practical details.

Selection Factor What to Confirm Why It Matters
Model Compatibility Whether the tester supports the exact hash board models handled by the workshop Prevents compatibility assumptions and unnecessary equipment purchases
PSU Testing Whether the relevant mining power supply models are supported Helps investigate power-related faults
EEPROM Function Which brands and board versions support EEPROM operations Clarifies whether the tool fits data-related maintenance tasks
Repair Workflow Whether testing functions can be used in the workshop's existing procedures Helps organize diagnostic work more efficiently
Technical Support Availability of model lists, operating instructions, and compatibility confirmation Reduces errors when working with different miner generations

Why Work with Xinjinyi?

Shenzhen Xinjinyi Technology Co., Ltd. was established in 2016. Our involvement in the ASIC mining machine business began in 2019, when we sold our first BM1397AG ASIC chip. Since then, we have expanded our business to customers in more than 10 countries and built relationships with over 100 customers worldwide.

We focus on mining machines, ASIC chips, ASIC-related components, Bitmain power supplies, Antminer control boards, Bitcoin miners, and mining maintenance equipment. This product experience gives us a practical understanding of the different components and maintenance requirements found in ASIC mining operations.

Our approach is based on building long-term relationships with customers and understanding the equipment they work with. For the PicoBT Multifunctional Hash Board Tester, we recommend confirming the exact hash board and PSU models before ordering so that compatibility can be checked against the supported list.

To learn more about our ASIC mining products and maintenance tools, visit Xinjinyi's product range or contact our team for product and compatibility information.

Frequently Asked Questions

1. What is the PicoBT Multifunctional Hash Board Tester?

PicoBT is an ASIC miner maintenance tool that integrates three functions: an EEPROM editor, a hash board tester, and a mining power supply tester. It supports more than 88 hash board models and over 20 mining PSU models from several manufacturers.

2. Which mining machine brands are supported by PicoBT?

The supported hash board brands include Antminer, Innosilicon, WhatsMiner, Aixin, Cheetah, Aladdin, and Dragon. The exact supported models vary by brand and hardware series, so the compatibility list should be checked before use.

3. Can PicoBT test both hash boards and mining power supplies?

Yes. PicoBT integrates hash board testing and PSU testing. It supports more than 88 hash board models and more than 20 mining power supply models, allowing technicians to use one tool for these two categories of maintenance checks.

4. Does PicoBT support EEPROM editing?

Yes. Its EEPROM flash and editor function supports Antminer and WhatsMiner hash boards. Technicians should confirm the exact board version and follow the appropriate maintenance procedure before editing EEPROM data.

5. Which Antminer models are compatible with PicoBT?

The supported Antminer list includes models from several generations, such as S9, S11, S15, S17, S19, S21, T9+, T15, T17, T19, T21, L3+, L7, D7, K7, and KA3 series models. Please confirm the exact board version because compatibility is model-specific.

6. Can a hash board tester repair a faulty ASIC mining machine automatically?

No. A hash board tester is a diagnostic and maintenance tool, not an automatic repair system. It helps technicians investigate supported components and identify possible problems. Component replacement, soldering, firmware work, and other repairs may still require specialist knowledge and additional equipment.

7. Why should technicians test the PSU when troubleshooting a mining machine?

A faulty or unstable power supply can cause startup failures, unexpected shutdowns, or abnormal miner operation. Testing a compatible PSU helps technicians determine whether the power supply may be contributing to the problem before focusing on other components.

Conclusion

ASIC miner maintenance often requires technicians to investigate several connected components, including hash boards, EEPROM data, and mining power supplies. Using separate tools for each task can make the diagnostic process more complicated, especially in workshops handling different miner brands and generations.

The PicoBT Multifunctional Hash Board Tester brings these maintenance functions together in one device. With support for more than 88 hash board models, over 20 PSU models, and EEPROM editing for Antminer and WhatsMiner hash boards, it provides a practical testing solution for a wide range of ASIC miner maintenance tasks.

At Xinjinyi, we focus on ASIC mining equipment, components, and maintenance tools. We believe that selecting the right diagnostic equipment starts with understanding the actual models and repair requirements handled by each workshop. Confirming compatibility before testing or purchasing is an important step toward more organized and reliable maintenance work.


Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy